SP024 - UVITE

Manufactured by Phoenix Xtra and converted by Servicom Pacific

Following the tradition of the CARAT series the UVITE is the consequential addition to the globally successful UV-printing blanket RUBY CARAT.

The improved compressible layer of UVITE CARAT guarantees for exceptional print results and a long lifetime. The extremely low dot gain is easily achieved with the split top layer and the finely ground surface.

The rubber compound of the top layer was developed towards reduced ink and paper dust build-up for prolonged washing intervals and extended lifetime. Because of its special formula UVITE CARAT is well suitable for the use with hybrid inks.

The tight tolerances of the CARAT series offer the printers the ability to produce in an equally high quality at any time. By using special additives in the EPDM-top layer the ink transfer is being supported as well as the heat resistance is being improved. All this makes the UVITE CARAT an important tool in the production of printed goods of highest quality.

Uvite Carat

Technical Data

  • Colour
  • UVITE violet
  • Identification
  • Brown thread woven in travel direction
  • Thickness
  • Art.398: 1.95mm (4 ply)
  • Elongation
    at 500N / 50mm
  • ≤ 0.9%
  • Compressibility
    at 1350kPa
  • Approx. 10%
  • Tensile Strength
  • ≥ 3,0000 N/ 50mm
  • Reduction in thickness
    (due to tensioning and setting)
  • ≤ 2%
  • Hardness
  • Approx. 80 Shore A
  • Surface rubber
  • Approx. 53 Shore A
  • Roughness (RZ)
  • Approx. 5 μm
  • Roughness (RA)
  • Approx. 2.8 μm

Download Brochure

Uvite SP024 Spec